To Next PageTo Next Page
Need help?Do you have a question about the Profoto B2 250 AirTTL and is the answer not in the manual?
General| Power Output | 250 Ws |
|---|---|
| TTL Functionality | Yes |
| HSS | Yes |
| Modeling Light Type | LED |
| Battery Type | Li-Ion |
| Weight | 1.3 kg |
| Wireless Range | 300 m |
| Energy Range | 9 f-stops |
| Compatibility | Canon, Nikon, Sony |
| Color Temperature | 5600K |
General warnings and precautions for safe operation.
Warnings regarding high voltage, proper grounding, and equipment safety.
Guidelines for the safe handling, charging, and disposal of lithium-ion batteries.
Cautionary note about touching hot components during and after operation.
Step-by-step instructions for initial setup and basic functions.
Procedures for powering the unit on, off, and managing automatic sleep mode.
How to set flash energy levels in manual mode using control dials.
Selecting sync modes (AIR, SLAVE, Cable) and using Air transceiver for control.
Detailed guide on using Air for remote control and automatic TTL flash exposure.
Guidance on choosing between Normal and Freeze modes for varied shooting conditions.
How TTL mode automatically adjusts flash energy for perfect exposure.
Using HSS for faster shutter speeds and controlling ambient light during flash.
Checking battery level and detailed steps for charging the battery pack.
Safe method for connecting the lamp head to the generator socket.
