Profroid MINICOLD COMPACT MCH 103 ZC User Manual

NOTICE D ' I N S TR UC T IO N S
OPERATING I N S TR UC T IO N S
MONTAGE / MISE EN SERVICE / UTILISATION / M AI NT E N A NC E
INSTALLATION / COMMISSIONING / OPERATING / M AI NT E N A NC E
(A fournir à l’utilisateur final pour compléter le dossier d’exploitation requis pendant toute la durée de vie de l’appareil)
(Must be given to the end user in order to complete the operating manual during the equipment service life)
MINICOLD C OM P A CT
Groupe de Fluide DESP : 2 / PED fluid group : 2
Il est impératif de prendre connaissance de ces instructions dès réception de l’appareil et avant toute intervention sur celui - ci .
Notre service technique reste à votre entière disposition au 33 04 42 18 05 00 pour toutes précisions supplément a ires .
These operating instructions must be read at the delivery of the equipment and prior any operation on it .
Our technical department is at your disposal for any additional information (Tel : ++ 33 4 42 18 05 00) .
This document is a translation of the French original version which prevails in all c a ses .

Profroid MINICOLD COMPACT MCH 103 ZC Specifications

General

Brand	Profroid
Model	MINICOLD COMPACT MCH 103 ZC
Category	Refrigerator
Language	English

Summary

OPERATING INSTRUCTIONS

Product Overview and Phases

Introduces the Minicold Compact and its operational phases.

RE-EVAPORATING WATERTRAY

Installation and Usage Guide

Details installation steps and functional use of the tray.

ELECTRICITY

General Electrical Requirements

Covers electrical standards, power supply, and conformity.

EW974 Controller Description

Explains the controller's role and features.

EW974 CONTROLLER OPERATION

Controller Characteristics and Running Mode

Lists operating limits, specifications, and detailed running mode explanation.

EW974 CONTROLLER INTERFACE

Keys, LEDs, and Buttons

Identifies and explains the function of control interface elements.

EW974 CONTROLLER MENUS

Machine Status and Menu Access

Navigating the machine status menu and general menu access.

Setpoint Lock and Menu Navigation

Managing setpoint locks and navigating programming menus.

SETPOINT AND PROBE MANAGEMENT

Adjusting Set Points and Viewing Probes

Procedures for setting temperature and checking sensor values.

Disabling Setpoint Changes

How to prevent unauthorized setpoint modifications.

PROGRAMMING MENU AND PASSWORDS

Programming Menu Access and Passwords

Entry into the programming menu and using passwords for access.

Manual Defrost Activation

Procedure for manually initiating the defrost cycle.

DIAGNOSTIC ALARMS AND ERRORS

Alarm Signaling and Error Codes

Explains alarm indications and specific error codes (E1, E2).

TECHNICAL DATA AND CONDITIONS OF USE

Electrical Connections and Safety

Guidelines for wiring, connections, and safe usage practices.

Permitted and Prohibited Applications

Defines acceptable and unacceptable uses of the instrument.

FACTORY SETTINGS AND PARAMETERS

Compressor and Defrost Parameter Configuration

Default settings for compressor and defrost functions.

EVAPORATOR FAN AND ALARM PARAMETERS

Fan Control and Alarm Settings

Parameters related to fan operation and alarm triggers.

DISPLAY AND CONFIGURATION SETTINGS

Display Options and General Configuration

Settings for the display and overall unit configuration.

COPY CARD AND FIRMWARE MANAGEMENT

Copy Card Functions and Firmware

Procedures for using the Copy Card and managing firmware.

START UP PROCEDURE

Initial Unit Connection and Setup

Steps for powering on and initial configuration.

TROUBLESHOOTING GUIDE

Common Problems and Solutions

Diagnosing and resolving operational issues.

ALARM DESCRIPTIONS AND RESOLUTIONS

Sensor Fault and Temperature Alarms

Details alarms for probe errors and temperature deviations.

Door and Defrost Alarms

Describes alarms related to door status and defrost cycle timeouts.