Progetti EPG View/Par. C./ Int.

To Next Page

EPG View USER MANUAL V. 03-10 Pag. 1

PROGETTI S.r.l. - Via B. Buozzi, 28 10024 Moncalieri (To) Italy – www.progettimedical.com - info@progettimedical.com

EPG View/Par. C./ Int.

1-3 CHANNELS ELECTROCARDIOGRAPH

WITH GRAPHICAL DISPLAY AND PRINTER

USER MANUAL

1. INTRODUCTION

2. CHARACTERISTICS AND SAFETY RIFERIMENTS

3. USE INSTRUCTIONS

3.1 INITIAL SET-UP AND AMBIENTAL CONDITIONS

3.2 RECOMMENDATIONS FOR SAFE USE

3.3 POWER ON/OFF

3.4 KEY BOARD DESCRIPTION

3.5 DEFAULT OPERATIONAL SET-UP

3.6 THE MAIN OPERATIONAL MODES

3.7 SECONDARY OPERATIONAL MODES CHANGE

3.8 PREPARATION OF THE PATIENT

3.9 ELECTRODES APPLICATION

3.10 IMAGE FREEZING

3.11 PRINTING TRACES

3.12 LOADING THE THERMAL PAPER

3.13 BATTERIES CHARGE

4. MAINTENANCE

4.1 GENERAL RACCOMENDATIONS

4.2 PERIODIC CONTROLS

5. STANDARD ACCESSORIES

6. TROUBLE SHOOTING

Main Page

Need help?

Do you have a question about the Progetti EPG View/Par. C./ Int. and is the answer not in the manual?

Summary

Introduction

Characteristics and Safety Requirements

Use Instructions

Initial Set-up and Ambient Conditions

Guidance on environmental conditions and initial setup for optimal ECG recording.

Recommendations for Safe Use

Important safety guidelines and precautions for operating the EPG View device.

Power On;Off

Instructions for turning the EPG View electrocardiograph on and off.

Key Board Description

Explanation of the functions of each key on the EPG View control panel.

Default Operational Set-up

Details the default settings applied when the EPG View unit is powered on.

The Main Operational Modes

Description of the primary operating modes and how to select paper speed and sensitivity.

Secondary Operational Modes Change

How to access and change secondary operational parameters via menu options.

Preparation of the Patient

Essential steps for preparing the patient to ensure accurate ECG recordings.

Electrodes Application

Instructions on the correct placement of electrodes for optimal signal acquisition.

Image Freezing

How to freeze the ECG display and review recorded traces.

Printing Traces

Methods for printing ECG traces in manual, isochronous, and sequential modes.

Loading the Thermal Paper

Procedure for loading and feeding the thermal paper roll into the printer.

Batteries Charge

Guidelines for charging the internal rechargeable batteries for the device.

Maintenance

General Recommendations

General advice and precautions for maintaining the EPG View device.

Periodic Controls

Recommendations for regular checks to ensure proper operation, especially battery status.

Standard Accessories

Trouble Shooting