ProGlove Mark 2 Quick Start Guide

30 -150 cm
10 - 80 cm
mid range
standard range
PAIR
04
- for a smarter workforce
MARK 2 BLE HID
CHECK INSERT
TURN ON
REMOVE
SCAN
CHARGE
01 02
03
07
06
08
In case there is no Pairing Barcode label on end device:
scan this Pairing Barcode
Press and hold the trigger, scan Pairing Barcode label on end
device. Wait until MARK 2 blinks blue twice to indicate
successful pairing.
QUICKSTART GUIDE
PAIRING BARCODE
05
BLE
TIP: HANG IT UP
Hang up the Quickstart Guide to make it
available for quick information access.
MAKE SURE TO PAIR THE CORRECT DEVICES.

ProGlove Mark 2 Specifications

General

Protection Class	IP54
Supported Symbologies	1D and 2D barcodes
Charging Time	2.5 hours
Connectivity	Bluetooth Low Energy
Battery Life	Up to 10 hours
Operating Temperature	-10°C to 50°C
Drop Resistance	1.8 m
Scan Range	Up to 150 cm