Need help?Do you have a question about the ProGlove Mark 2 and is the answer not in the manual?
General| Protection Class | IP54 |
|---|---|
| Supported Symbologies | 1D and 2D barcodes |
| Charging Time | 2.5 hours |
| Connectivity | Bluetooth Low Energy |
| Battery Life | Up to 10 hours |
| Operating Temperature | -10°C to 50°C |
| Drop Resistance | 1.8 m |
| Scan Range | Up to 150 cm |
Provides contact details for technical assistance with ProGlove devices.
Provides contact details for sales inquiries and information.
Overview of the manual's content, intended audience, and purpose.
Indicates potential for slight bodily injury or damage to the MARK 2 system.
Provides additional information or notices related to a chapter.
Offers additional tips to facilitate procedure implementation.
Shows the outcome or result of a prior action.
Safety precautions specifically for the MARK 2 hardware components.
Safety precautions for the MARK 2 wearables, such as gloves.
Details the contents of the Access Point One S when connected via USB.
Details the contents of the Access Point One S when connected via RS232.
Explains the two transmission types for MARK 2 system data.
Provides a general introduction and description of the Access Point One S.
Details the parameters for establishing a USB CDC connection.
Outlines keyboard layout options for USB HID connections.
Details the parameters for establishing an RS232 connection.
General introduction to the Charging Station S and its capabilities.
Description of the standard glove, its features, and placement.
Description of the Longlife/Palm Trigger, its use, and fit.
Description of the Index Trigger, its placement, and applications.
Step-by-step guide for charging the MARK 2 device.
Guide for connecting the Access Point One S via 868/915 MHz.
Procedure for connecting MARK 2 to Access Point One S using 868/915 MHz.
Steps for connecting MARK 2 to an end device via Bluetooth Low Energy HID.
Lists requirements for establishing a BLE HID connection.
Provides helpful advice for connecting MARK 2 via BLE HID.
Procedure to disconnect MARK 2 from the Access Point One S.
Instructions on how to disconnect the connection cable from the Access Point One S.
Steps to disconnect MARK 2 from Apple iOS devices.
Configuration of barcode types, lengths, and tolerances.
Configuration of data formatting using prefixes and suffixes.
Advanced data formatting with rules, conditions, and actions.
Guidelines for storing the MARK 2 system hardware and wearables.
Instructions for cleaning the MARK 2 system hardware and wearables.
Troubleshooting common problems related to the MARK 2 device.
Lists safety and LVD testing standards applied to the device.
Details compliance with environmental protection regulations like RoHS.
Outlines the device's compliance with FCC regulations.
Contact information for receiving technical support for ProGlove products.
Contact information for sales inquiries and purchasing ProGlove products.
To Next Page
