ProGlove Mark 2 - CHARGING STATION S; OVERVIEW

12
The Charging Station S consists of two charging trays
that charge two MARK 2 devices at the same time. The
charging status is indicated by the LEDs of MARK 2. The
LEDs pulse red while in charging mode. When the battery
is fully charged, the LEDs pulse green constantly. It takes
about 2 hours to charge a MARK 2. The Charging Station S

attachment openings
(with M5 screws or cable ties).
MECHANICAL PROPERTIES:
Dimensions: ............................. 
Weight: ...................................... 110g
ELECTRONIC PROPERTIES:
Power supply: ........................... 5 VDC (1.2 A)
via power supply SAW-0501200
ENVIRONMENTAL CONDI-
TIONS:
Protection against dust and
water: ....................................... IP20
Working temperature: ............ -23°F to +122°F
CHARGING STATION S
OVERVIEW TECHNICAL DATA
USB-C
Charging tray
Attachment
opening
for M5
screws
Pins
Label with serial numberAttachment opening for
cable ties