ProGlove Mark 2 - STANDARD GLOVE; OVERVIEW

13

attached to the right or left glove.
NOTE
The Standard Glove is available in four different sizes
(stan-
dard industry sizes 7,8,9,10).
GENERAL:
Packaging unit: ......................... 5 gloves per package
Coating:..................................... Nitrile/PU coating
SAFETY & CERTIFICATION:
Standards: ................................ EN388 (2131)
EN420
: ............................. RoHS
CE mark
according to EN 420 and EN
388: .......................................... Abrasion resistance 2
Cut resistance 1
Tear strength 3
Penetration force 1
STANDARD GLOVE
OVERVIEW PROPERTIES

Nitrile/PU coatingFastening rail
Label with size indication