35
MARK 2
PROBLEM CAUSE SOLUTION
MARK 2 is not responding. Battery is not charged.
Charge MARK 2 in the Charging Station S
for at least 20 min.
Glove is defective.
Change glove.
MARK 2 is not vibrating or does not
beep after successful data transfer.
Feedback signals are disabled.
Check whether the feedback signals in the
are
red.
The battery charge is low.
Charge MARK 2 in the Charging Station S
for at least 20 min.
TROUBLESHOOTING
To Next Page
Loading...
