Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
9.9
1.039
2)
/1.036
3)
227
2)
/227
3)
11.1 - 13.6 1.052 - 1.285 160
9.6 - 11.7 0.886 - 1.083 90
9.2 - 11.2 0.556 - 0.680 30
3.4 - 4.2 0.012 - 0.015 15
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity
of dishes can change the values.
2)
In accordance with the 1016/2010 regulation
3)
In accordance with the 2019/2022 regulation
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the product
number code (PNC) found on the rating
plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold the programme button
until the appliance is in programme
selection mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
8 Progress
To Next Page
Loading...
Need help?
General
