Project Nursery PNMC01 User Manual

Wireless camera
(1) 10-foot charging cable
(1) power adapter
Check out our setup videos
On your computer, go to
ProjectNursery.com/Electronics or
scan the QR code here.
Unpack
1
Pair the camera with your monitor(s)
2
Before you start pairing the monitors with your camera, bring
the camera into the same room so that you have it handy. You
can put it in the baby’s room once you’ve finished pairing.
1
Plug one end of the charging cable
into the DC In jack on the back of
the camera.
Plug the other end into the single
charging adapter. Then plug the
adapter into an outlet or surge
protector.
The camera turns on automatically
when it’s plugged in (the indicator
light on the base below the camera
lens turns blue).
2
3
Make sure the monitor you want to pair this camera with is
turned on. If it isn’t press its POWER button to turn it on.
Use the arrows to
highlight CAMERAS.
Press OK/ZOOM to select
it. The Cameras menu
appears on screen.
Press the MENU button
on the monitor. The menu
appears on screen.
12:00AM
4
5
Accessory Camera
Quick Start Guide
Continues on back...
PNMC01 QSG 01

Project Nursery PNMC01 Specifications

General

Brand	Project Nursery
Model	PNMC01
Category	Baby Monitor
Language	English

Summary

Unpack and Setup Essentials

Package Contents Overview

Details the items included in the accessory camera package: wireless camera, charging cable, and power adapter.

Pairing Your Project Nursery Camera

Initial Camera Power Connection

Connect the camera to power using the provided charging cable and adapter.

Monitor Preparation and Menu Navigation

Ensure the monitor is on and navigate to the Camera menu by pressing MENU and OK/ZOOM.

Executing the Pairing Process

Select 'Pair Camera', assign a number, press the camera's pair button, and confirm status.

Camera Positioning and Safety Guidelines

Optimal Camera Placement Strategy

Place the camera on a flat surface or wall mount for best viewing angles.

Critical Safety Warnings for Use

Adhere to strict safety measures regarding cords and placement to prevent child strangulation hazards.