7
Q: When the black and white stripe wire is connected to house battery which is
being charged, the charging LED is not turned on.
A: Check if the house battery voltage is below the internal battery voltage. If yes, the
charging LED will be turned on once both battery voltages are equal. If not, check
if the internal battery terminals are connected well with female blade terminals.
Q: When using an external charger to charge the Sure Brakes internal battery,
what current setting should I use?
A: The charging current should not be set more than 2A (otherwise, the internal
resettable fuse will activate and limit the current).
To Next Page
Loading...