10
7. Indoor device settings
The left-hand and right-hand side flow directions can be adjusted manually.
Perform these adjustments before you start the device because once it has been started the slats vibrate and
there is a risk of your fingers getting caught.
Remote control fails to work (emergency operation)
If the remote control fails to work (empty batteries or
malfunction), use the emergency switch.
- The device is off: After the emergency stop switch has been
pressed the device switches to automatic mode. The slat
adjuster also operates in automatic mode.
- The device is on: The device switches off if the emergency
switch is pressed.
To Next Page
Loading...
Need help?
General
