USER MANUAL for USB to serial converter (PL2303)
1
The USB to RS-232 Serial Adapter provides an external plug & play RS-232
serial connection with your computer, letting you free up your existing serial port.
Users have the capability to utilize the adapter with serial port interface in an
easy-to-use environment. The adapter is designed for connections to Cellular Phones,
PDAs, Digital Cameras, Modems, or ISDN Terminal Adapters through USB port with
over 600 kbps data transfer rate. Installation is very easy. Just simply connect a
serial device to the USB to RS-232 adapter and plug the USB port into the computer.
Features
•
Support automatic handshake mode over 600kbps data transfer rate
•
Support remote wake-up and power management 96 byte buffer each for
upstream and downstream data flow
•
Easy Installation
•
Work with Cellular Phones, PDAs, Digital Cameras, Modems, and ISDN
terminal adapters…etc.
•
Frees your RS-232 port for other uses
•
No IRQs required, no IRQ conflicts
•
Full compliance with the USB specification Revision 1.1
Specification
•
Each blister contains one USB to serial converter; one CD driver with user'
manual
•
Cable Length : Total 45 cm
•
Connectors: USB type A plug; RS-232 DB-9 Male
•
Data Transfer Rate : 600 kbps
•
OS supported : Win 98SE/2000/ME/XP; Mac OS 9.0 or above
*********************************************************************************
USB to serial converter (PL2303)
Driver Installation Under Windows 98/ME/2000/XP
–page 02~03
Driver Un-installation Under Windows 98/ME/2000/XP
–page 04~05
Driver Installation Under MAC OSX 8.6~9.x
–page 06~07
Driver Installation Under MAC OSX 10.1.x~10.3.x
–page 08~11
Driver Installation Under Linux
–page 12~12
Q&A
–page 13~14
*********************************************************************************
To Next Page
Need help?
General