24 25
PRODUCT OVERVIEW OPERATION
Plug in the appliance.
Slide the On/Off switch forward to turn on
the appliance, and then begin vacuuming.
ON
OFF
Attach the tube to the air intake opening.
Push until it clicks into place.
Attach the floor brush to the tube. Push until
it clicks into place.
To disassemble, press the tube and
floor brush release buttons to pull out
the tube.
You can also attach the crevice tool or
dusting brush onto the tube to clean
carpet edges and hard-to-reach areas.
When you have finished vacuuming, slide the
switch backward to turn off the appliance.
This appliance features 2-in1 stick/hand vacuum design.
Using as a stick vacuum cleaner
Handle
Power cord
5 Meters Corded
Do not need to replace the socket
frequently.
On/Off switch
Dust cup
Tube release button
Tube
Floor brush release button
Wall bracket
Floor brush
2-in-1 Crevice tool / Dusting brush
Wall plugs and screws
Crevice tool (use without bristles)
for cleaning corners, difficult-to-reach areas, etc.
Dusting brush (use with bristles)
for cleaning sofa, bookshelf, curtain, furniture, etc.
To Next Page
Loading...
Need help?
General