Downloaded from www.vandenborre.be
OPERATION
When the oven is plugged in, the display will show “0:00” and a beep sound
will be heard.
Setting the Clock
1. Press , the hour digits blink.
2. Turn to adjust the hour digits, the input hour should be a 24-hour time
value.
3. Press , the minute digits blink.
4. Turn to adjust the minute digits.
5. Press to confirm the setting. “:” blinks on the display.
Note:
1) If the clock is not set, the oven will not function when powered on.
2) During the clock setting, if you press
, the oven will return to the
previous status.
General Operations
1. Press once to temporarily stop cooking and you can start the
cooking again by pressing , or press twice to cancel the
cooking program.
2. After the cooking time has elapsed, the oven beeps five times and returns
to the standby mode.
3. During cooking, each press of can increase the cooking time by 30
seconds.
Microwave Cooking
1. Press and “P100” displays.
2. Press repeatedly or turn to select the required microwave power.
Microwave Power 100% 80% 50% 30% 10%
Display P100 P80 P50 P30 P10
3. Press to confirm.
4. Turn to set the cooking time.
5. Press
Note: You can check the cooking power during cooking by pressing .
Speed Cooking
In standby state, press
Each press of the button will increase the cooking time by 30 seconds. The
longest cooking time is 95 minutes.
to start cooking.
to cook with 100% power level for 30 seconds.
GB
To Next Page
Loading...
Need help?
General
