ENERGY SAVING TIPS
GB
To avoid unnecessarily long drying times and high consumption
of energy:
- Make sure that your laundry is thoroughly spun before drying.
- Load according to the optimum amount of laundry recommended for
the programme being used (see Programme chart).
- Make sure the room in which the dryer is located is well ventilated.
- Make sure the filter is clean before using the dryer.
UNPACKING THE APPLIANCE
-This appliance is heavy. Care should be taken when moving it.
-When unpacking the appliance, check that it is not damaged.
If in doubt, do not use it and contact the Service Centre.
-All packaging must be removed before use.
PRODUCT DESCRIPTION
1.Control panel
2.Door
3.Ventilation grille
4.Lower flap
5.Condenser water tank
6.Lint filter
7.Condensate hose
8.Filter base
29
Downloaded from www.vandenborre.be
To Next Page
Loading...
