Proline PTL6100 - Error Messages; Indicator Light Error Codes; General Error Handling

108
Status of indicator
light
Possible Cause Solution
Door is not closed properly. Close the door properly and restart.
Water injecting problem
during wash cycle.
Check if the water pressure is high
enough.
Straighten the water pipe.
Clean the inlet valve lter.
Overtime water draining Check the drain hose for blockage.
Water overow Restart the appliance.
Others Others
Restart the appliance. If problem
persists, please contact the
customer service.
Error messages
ash / o
Temp.
Temp.
Temp.
Temp.
Speed
Speed
Speed
Speed
Delay
Delay
Delay
Delay