PROLiNK DL-7202 - Device Interface and Buttons; Hardware Installation; Insert SIM card and battery

Hardware Installation3
Overview2
EN2EN2
English
Insert SIM card and battery
1. Open the battery
cover upwards.
3. Slide the Nano SIM
card (gold contacts
facing down) under
the SIM card slot.
2. Remove the battery.
Note:
1. Always switch off the device and disconnect the charger before removing the battery.
2. Open the card slot gently.
4. Slide the microSD
card into its slot.
5. Insert the battery
(with its exposed
copper contacts
first) into the battery
compartment.
6. Put the battery cover
back to its original
position.
Interface and Buttons
1. LCD display
2. Power button
3. WPS button
4. microSD slot
(under the battery)
5. Nano SIM slot (under the battery)
6. Reset button
7. USB Type-C port
*To reset, press and hold the reset button
for 3 sec after turning on the device.