7
How to change Web Login Password:
Step 1: Connect your device to the PEN1201 LAN port or
PEN1201 SSID (default is Prolink_XXXXX or Your
RouterSSID-ext)
Step 2: Launch a Web browser and type http://pen1201.setup
(please do type out http://)
Step 3: Locate, Click Password Settings, and proceed to set
your new password accordingly
Step 4: Click Save to proceed
Note: This password is referring to the Web Interface Login
password, not the Wi-Fi password
How to set PEN1201 as Router/AP (Access Point):
Please download and follow the respective Setup
Guide from the below link:
https://prolink2u.com/networking/wifi-extender/
pen1201/download/
To Next Page
Loading...
