PROLiNK PRC3801v2 User Manual

PROLiNK® PRC3801 Wireless AC1200 MU-MIMO Dual-Band Gigabit Router
3 Getting Started
3.1 TCP/IP Setup
By default PRC3801 IP address is 192.168.123.254 and Subnet Mask is 255.255.255.0. You are allow
to change the setting base your network architecture. To change the PRC3801 network setting refer to
Network Setting guide.
As previous chapter we have make a network connection setup, Computer is connected to PRC3801
through LAN port. Ensure your TCP/IP Protocol is set to “Obtain an IP address automatically” for
Windows or “DHCP: Automatically” for MAC. PRC3801 later will assign IP address to connected
Computer.
To verify the connection between Computer and PRC3801, you need to run command prompt and
execute Ping command to PRC3801 IP address. To execute Ping command you need to type ping
192.168.123.254 then press enter to start ping command. You will get the result as shown.
7

PROLiNK PRC3801v2 Specifications

General

Brand	PROLiNK
Model	PRC3801v2
Category	Network Router
Language	English