5.3.2 Display image is too large or small
Use the OSD controls to adjust Auto Setup.
5.3.3 The color are distorted
Check if the signal cable is properly connected.
Use the OSD controls to adjust the color control setting.
5.3.4 The image is too light or too dark
Use the OSD controls to adjust the brightness and contrast.
5.3.5 There is no sound or sound is low
Check the sound cable connection.
Make sure the computer sound program is working.
Adjust the volume on sound setting. Adjust your sound card or computer volume
setting.
Adjust the volume control keys on the monitor.
5.3.6 The screen appearing up and down H-rolling scan
Make sure the view of input signal is within the order of the monitor (60Hz –
75Hz)
5.3.7 How to clean the monitor
Make sure monitor is turn off.
Do not spray any liquid on the screen.
Use clean, soft and no fur cloth to clean the monitor screen.
A little non-ammonia liquid and non-alcohol glass cleaner is allowed to be used for
cleaning.
5.3.8 How to clean the cabinet
Use soft dry cloth
A little non-ammonia liquid and non-alcohol of non-abrasion cleanser is allowed to
use for cleaning the surface.
To Next Page
Loading...