To Next PageTo Next Page
Need help?Do you have a question about the ProLogic BITE ALARM K3 and is the answer not in the manual?
General| Brand | ProLogic |
|---|---|
| Model | BITE ALARM K3 |
| Category | Fishing Equipment |
| Language | English |
Locates isotope slots (2pcs 6mm x 2mm) and describes the anti-scratch/slip plate.
Details volume adjustment (4 levels) and mute function via short/long press.
Explains ON/OFF function and sensitivity adjustment (5 levels) via button presses.
Describes bite light (run) and drop back (return) visual indicators.
Specifies battery type (CR2) and low power warning (2.4V) indicators.
Details operational range (150/250m) and signal features.
Highlights carbon jacket, compact design, interchangeable seals, and TPR cover.
Turn off alarm, unscrew base, remove aluminium base, water seal, and carbon jacket.
Insert new battery, ensuring correct polarity for optimal performance.
Re-fit carbon jacket, water seal, aluminium base, and secure screws.
Press and hold M button on receiver to activate pairing and select LED colour.
Press ON/OFF to confirm colour, trigger bite on alarm head to register the link.
Hold M button for 8 seconds to clear all paired alarm links.
Avoid triggering alarms near eyes/ears, store in dry place, avoid impacts, use recommended batteries.
Keep receipt as proof of purchase; contact local retailer or Svendsen-Sport for support.
Declares conformity with EU Radio Equipment Directive 2014/53/EU and lists applicable standards.
Lists all Prologic K3 Bite Alarm models and receiver, confirming the brand name.
