prologue MR8018 User Manual

GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
12 8
4 5
3
6
7
20140226
Digital Watch
Art.no 36-5572 Model MR8018
Please read theentire instruction manual before using theproduct and then
save it for future reference. We reserve theright for any errors in text or images
and any necessary changes made to technical data. If you have any questions
concerning technical problems please contact our Customer Services.
Description
Features:
• Display of hours, minutes, seconds, month, date and day of theweek
• Backlight
• Stopwatch with lap-times
• Alarm
• Hourly chime
• Water resistant
Buttons and symbols
3. Press[ RESET ] once so that theminutes start flashing and thealarm
symbol appears so that you can adjust thesetting.
4. Press[ START ] repeatedly to set theminutes. Holding the[ START ] button
in will advance thesetting more quickly.
5. Press[ MODE ] to return to normal timemode.
Activate or deactivate thealarm by holding in [ RESET ] and pressing [ START ]
at thesametime. To check theset alarm time: hold in [ RESET ].
• When thealarm is activated, thealarm symbol
will appear on
thedisplay.
• When thealarm sounds it can be shut it off by pressing [ START ] or [ RESET ].
• To shut it off permanently press [ RESET ] and [ START ].
Stopwatch
In normal timemode:
1. Press[ MODE ] once to enter thestopwatch mode.
2. Press[ START ] to start thestopwatch, both theouter segments “SU” and
“SA” will flash when thestopwatch is started, in addition theseconds
indicator (9) will flash rapidly.
3. Press[ START ] once more to stop thetime-keeping, the“SU”, “FR” and
“SA” segments will start to flash and theseconds indicator will stop
flashing.
4. Toreset thestopwatch to zero, press [ RESET ] when thestopwatch
isstopped.
5. Press[ MODE ] to return to normal timemode.
Split times
An unlimited number of split times can be recorded. Torecord asplit time, do
as follows:
1. Press[ RESET ] whilst thestopwatch is running – “SU”, “TH” and “SA” will
flash during thetime thestopwatch is stopped. Thesplit time will appear
on thedisplay.
2. Press[ RESET ] to start thetimekeeping again. “SU” and “SA” will flash
and thetimekeeping will resume. Remember thesplittime.
3. Press[ RESET ] again to take thenext split time, and soon.
4. Press[ MODE ] to display theoverall time elapsed.
Hourly chime
In normal timemode:
• Activate or deactivate the hourly chime by holding in [RESET] at the same
time as pressing [MODE].
• When the hourly chime is activated, all the day symbols (3) will appear on
the display when [RESET] is pressed.
• When the hourly chime is deactivated, none of the day symbols (3) will
appear on the display when [RESET] is pressed.
Backlight
• Press [ LIGHT ] to turn thebacklight on for 3 seconds.
• Bear in mind that frequent use of thebackground light discharges
thebatteries faster.
Care and cleaning
• Never try to open thecasing.
• The watch can withstand some rough treatment, but do not subject it to
unnecessary shocks orblows.
• Do not expose thewatch to extreme temperatures.
• Cleanit using asoft, dry cloth. Avoidsolvents and strong detergents since
they can damage theplastic parts of thewatch.
• The watch is water resistant to acertain degree and can withstand rain
and splashes. However, it will not withstand being immersed inwater.
Things to consider
• Take your watch back to theshop you bought it from to replace
thebattery when it is flat. Theold battery must be removed, otherwise
theinternal components of thewatch could become damaged.
• If condensation forms on theinside of thedisplay, thewatch must be
returned to its place of purchase for repair.
• The watch must not be used in extreme temperature conditions.
Therecommended operating temperature range is from –5 to 50 °C.
• The watch battery has been tested and fitted at theplace of manufacture.
Whenthewatch is sold, thecapacity of thebattery will not be 100%.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Battery 1×SR54/V389 (1.5 V)
Diam 45mm
Accuracy ± 30 seconds/month
1. Timedisplay.
2. [ MODE ] Mode selector
button.
3. SU-MO-TU-WE-TH-
FR-SA Day of theweek
indicator for normal time
display and indicator for
stopwatch mode.
4. [ LIGHT ] Switches
thebackground light on
(for 3 seconds).
5. [ START ] Start/Stop
button for stopwatch,
hold in to display
month/date.
6.
and Chime are
shown on the display
when the alarm is
activated.
7. Seconds display in normal time display mode, shows 1/100 when in
stopwatch mode.
8. [ RESET ] Holding in this button will display theset alarm time.
Resetsthestopwatch and starts/stops splittimes.
Operating instructions
Selecting functions
• Pressing the[ MODE ] button repeatedly changes themode in
thefollowing sequence: normal time – stopwatch – alarm set – clockset.
• In stopwatch or alarm mode, press [ START ] or [ RESET ] before you press
[ MODE ] to go back to normal timemode.
12- and 24-hour clock
In normal timemode:
1. Press[ MODE ] three times to get to theclock setmode.
2. Press[ RESET ] twice to enter thehour setmode.
3. Press[ START ] repeatedly to increase thehours setting. Whenthewatch
is in 12-hour clock mode, “A” (for AM) is shown on thedisplay and
changes to “P” (for PM) in theafternoon. Continue until “H” appears on
thedisplay, this indicates that thewatch is in 24-hour clockmode.
4. Press[ MODE ] to return to normal time mode. When“H” is displayed after
thetime, thewatch is in 24-hour clockmode.
Setting the clock
In normal timemode:
1. Press[ MODE ] three times to get to theclock set mode. Theseconds
display blinks.
2. Press[ START ] to reset theseconds display.
3. Press[ RESET ] to start theminutes flashing so you can adjust thesetting.
4. Press[ START ] repeatedly to set theminutes. Thesetting will advance
quickly if you hold the[ START ] button in.
5. Thenpress [ RESET ] and then [ START ] to set thehours thesame way as
in step4.
6. Proceed in thesame way as above to make settings for date, month
andday.
7. Press[ MODE ] to return to normal timemode.
Setting the alarm
In normal timemode:
1. Press[ MODE ] twice to get to thealarm setting mode. Theseconds
display disappears and “A”, “P” (12-hour clock) or “H” (24-hour clock) will
appear instead.
2. Press[ START ] repeatedly to set thehours. Thesetting will advance
quickly if you hold the[ START ] button in.

prologue MR8018 Specifications

General

Brand	prologue
Model	MR8018
Category	Watch
Language	English

Summary

Digital Watch Features

Description

Lists key features such as display, backlight, stopwatch, alarm, chime, and water resistance.

Buttons and Symbols Guide

Time Display

Indicates the current time display.

Mode Selector Button

The [MODE] button used to cycle through different watch functions.

Day of Week Indicator

Shows the day of the week and indicators for time/stopwatch modes.

Backlight Control

The [LIGHT] button activates the background illumination.

Stopwatch Start/Stop

The [START] button controls stopwatch operation and displays month/date when held.

Alarm and Chime Indicators

Symbols indicating when the alarm or hourly chime is active.

Seconds Display

Shows seconds in time mode and 1/100ths in stopwatch mode.

Reset and Split Time Control

The [RESET] button manages alarm time, resets stopwatch, and controls split times.

Operating Instructions

Selecting Functions

Instructions on how to switch between time, stopwatch, and alarm modes.

12- and 24-Hour Clock

Guide to setting the clock to either 12-hour or 24-hour format.

Setting the Clock

Step-by-step process for setting the time, date, month, and day.

Setting the Alarm

Instructions for setting and managing the alarm function.

Stopwatch Operation

How to use the stopwatch, including starting, stopping, and resetting.

Split Times Recording

Procedure for recording and viewing split times during stopwatch use.

Hourly Chime

How to activate or deactivate the hourly chime feature.

Backlight Usage

Information on using the backlight and its effect on battery life.

Care and Cleaning

Guidelines for maintaining the watch's condition and appearance.

Important Considerations

Notes on battery replacement, temperature limits, and general usage.

Product Disposal

Instructions for disposing of the watch according to local regulations.

Specifications

Technical details including battery, diameter, and accuracy.