USING YOUR VACUUM
1. Insert the battery into the vacuum
2. Connect hose and telescopic tube if desired.
3. Correctly place shoulder straps on each shoulder and secure the waistband strap. (Fig 8 through Fig 8b)
Caution: If the waistband and both shoulder straps are not properly and securely in place, the unit could fall off your
back, causing damage or injury.
4. Turn the unit on/off by pressing the switch located near the base of the unit. (Fig 9)
Fig 8 Fig 8A
Fig 8B Fig 9
- 12 -
To Next Page
Loading...
