Proluxe SL1577 User Manual

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

formerly DOUGHPRO. New Name. Same Quality. Superior Service.

proluxe.com

Operations Manual

Model: SL1577

Split Lid Grill

rev8-71713

Table of Contents

Questions and Answers:

S
Samantha WarnerJul 30, 2025
What to do if the Proluxe SL1577 Grill power button is depressed but doesn’t turn on?
- S
  Sabrina DelacruzJul 30, 2025
  If the power button on your Proluxe Grill is depressed but the unit doesn't turn on, there are several potential causes: * **Power Cord:** Ensure the power cord is securely plugged into the wall receptacle and the grill. * **Circuit Breaker:** Check the circuit breaker in your breaker box to see if it has tripped. If so, reset it and try turning the grill on again. * **Transformer:** The transformer may be damaged from an electrical surge and require replacement. * **Controller Voltage:** Verify the voltage on the secondary side of the transformer. If you are receiving 12VDC, replace the controller. * **Fuse:** Check the fuse and replace it if it's blown.
T
Tina VelasquezAug 15, 2025
Why are the digital controller's LEDs scrambled on my Proluxe Grill?
- N
  Nicole KellyAug 15, 2025
  If the digital controller's LEDs on your Proluxe Grill are scrambled or acting erratically, it could be due to a damaged component on the digital controller. In this case, you should replace the digital controller. Alternatively, the control might need a reset. To do this, while the unit is on and the controller is lit up, unplug the unit, wait one minute, then plug it back in and depress the power button.

Proluxe SL1577 Specifications

General

Brand	Proluxe
Model	SL1577
Category	Grill
Language	English

Summary

Operation Instructions

Power Connection and Electrical Specs

Warm-up and Operation Procedures

Steps for pre-heating, turning on, and operating the grill using preset timers.

General Cleaning Guidelines

Clean Cycle Operation

Setting Clean Cycle Temperature

Initiating and Stopping Clean Cycle

Procedure for starting, monitoring, and deactivating the clean cycle.

SL1577 Operating Procedures

Adjusting Appliance Settings

Temperature Adjustment Guide

Detailed steps for adjusting the appliance temperature using specific button sequences.

Set-Time Adjustment Guide

Troubleshooting Common Issues

Power and Controller Display Problems

Resolving issues with the power button, erratic LEDs, and controller beeping.

Heating and Temperature Accuracy

Diagnosing no heat, inaccurate temperatures, or platens not reaching set points.

Advanced Troubleshooting

Heater Platen Performance Issues

Diagnosing non-heating or overheating heater platens and relay issues.

Platen Alignment and Tension

Zone Temperature Discrepancies

Addressing issues where one heating zone is not reaching setpoint while another overheats.

Schematic Diagram and Wiring

Power and Zone Wiring Configuration

Diagram illustrating power input, zone wiring, relays, and thermostats.

Controller and Sensor Connections

Schematic showing connections for the digital controller, RTD sensors, and AC input.

Limited Machine Warranty Details

Warranty Coverage and Service

Warranty Exclusions List