A Power cord
B Socket for the hand unit cable
C On/off switch
D Speed controller
E Tension ring (chuck open/closed)
F Switch for direction of rotation, counter-clockwise/clockwise
G Socket for the foot pedal cable
H Foot pedal
I Control LED
J Fuse
K Voltage selector switch
Important Notes:
Please hold at least 2 - 3 mm distance between handpiece point
and drill bits.
Before drill bit changing, please reduce the rotation speed to zero.
Otherwise the handpiece can be damaged.
GettinG started
Please read the user manual thoroughly before using
the appliance for the first time.
Thank you for purchasing the Promed 2520 manicure and
pedicure device. This device was designed and made to
guarantee the quality of treatment and may be used by both
qualified personnel and private individuals after reading these
instructions. This device is designed for use in the manicure and
pedicure treatments.
We, as the manufacturer, cannot be made liable in any way for
injury or damages to people or objects that arise from failure to
comply with this warning. The unit is also suitable for use in the
area of nail techniques and nail design as well as the handling
of all materials used in this area such as gel and acrylic.
To Next Page
Loading...