To Next PageTo Next PageWhy ProMed NRP-5.4 does not work?
Your ProMed Heater might not be working because it's not correctly connected. Ensure the operating unit plug and the heating pad socket are tightly connected. Also, the automatic deactivation function might be activated. Use the On/Off button to switch the heating pad on and off.
What to do if 'F' is flashing on my ProMed NRP-5.4 Heater display?
If 'F' is flashing on your ProMed Heater display, it could be due to incorrect connection sequence or accidental disconnection. First, ensure you insert the operating unit plug into the heating pad socket before plugging into the wall socket. If that doesn't work, remove the wall socket plug, re-insert the operating unit plug into the heating pad socket, and then plug it back into the wall.
Provides a detailed overview of the neck and back heating pad's features and benefits.
Details the automatic deactivation function of the heating pad after 90 minutes of use.
Provides guidance on how to clean and maintain the heating pad safely and correctly.
General