Item Function Description
(The two options below are only available when HDMI-CEC is On)
• CEC
Standby
Set the control of devices connected via the HDMI port Off/On
• CEC
Device
List
Lists alll the CEC compatible devices connected to the HDMI port
Backlight Setting menu
Item Function Description
Backlight Mode Set the backlight display mode Standard, Energy Saving, Auto
Backlight Level Set the brightness of the backlight Increase/decrease (0-100), the backlight
value
Light reponse
speed
Set the speed at which the backlight responds to changes in the
ambient light
Slow/Fast
Boot Setting menu
Item Function Description
Boot Source Sets the source the panel boots to when switched on Last Source/Fixed Source
(The option below is only available when source is set to FIXED CHANNEL)
• Fixed
Source
Set the source the panel will always boot to when switched on OPS, HDMI1, HDMI2,
HDMI3, AV, YPBPR, Media
Browser, VGA
WOL Set if panel can be switched on by a network message Off/On
(If WOL is set to ON then the network address will be displayed below the WOL setting)
Remote
Manager
Allows the panel to keep the OPS active when the panel is turned off. Through Remote
Management, the panel can have the OPS turn on the panel.
Off/On
ActivPanel System Install and User Guide 80
To Next Page
Loading...
Need help?
General
