Setting Menu
Item Function Description
Menu time Set the menu display time [5s], [10s] [15s], [30s], or[Always]
Restore to default Restore the factory default settings Restore the settings to the default values
MHL auto switch Turns on the function that automatically
switches input to the MHL device when the
MHL device is played
Off/On
HDMI EDID version Extended Display Information Data Default, EDID 1.4, EDID 2.0
Operation
Sound Mode Menu
Item Function Description
Sound mode Select a sound effect [Standard], [Music], [Movie], [Sports] or [User]
Balance Adjust balance between left
and right speaker
Move to left/right to increase the left- speaker/right-
speaker volume
Low pitch Adjust the bass The bigger value (0-100), the higher bass
High pitch Adjust the treble The bigger value (0-100), the higher treble
SPDIF output Digital output Off/RAW/PCM
Item Function Description
Picture mode Adjust the overall image effect [Standard], [Music], [Movie], [News], [User]
Contrast Adjust the overall image layering The greater the value (0-100), the higher
the layering
Brightness Adjust the overall image brightness The greater the value (0-100), the higher
the brightness
Hue Adjust the colour hue The greater/smaller the value (0-100), the
greener/purpler the tone
Sharpness Adjust the image sharpness The greater the value (0-100), the sharper
the image
Saturation Adjust the colour depth The greater the value (0-100), the deeper
the colour
Backlight Adjust the backlight of the LCD Panel. The greater the value (0-100) the stronger
the light
PC Image Mode Only works on the PC display when
VGA connected
Colour temperature Adjust the overall colour temperature [User], [Cool], [Nature] or [Warm]
Zoom mode Adjust aspect ratio [4:3], [PCMode] or [Full]
Image noise reduction Set the noise reduction level [Middle], [Strong], [Off] or [Weak]
MPEG noise reduction
Picture Menu
ActivPanel Installation Guide 25
To Next Page
Loading...
