To Next PageTo Next Page
Need help?Do you have a question about the ProMinent DULCOTEST CLE 3.1-mA and is the answer not in the manual?
General| Type | CLE 3.1-mA |
|---|---|
| Process temperature | 0 – 45 °C |
| Electrolyte | KCl |
| Connection | PG 13.5 |
| Output signal | 4 – 20 mA |
| Power supply | 24 V DC |
| Protection class | IP 65 |
| Material | PVC-U |
| Product group | Sensor |
| Category | Chlorine sensor |
| Operating temperature | 0 – 45 °C |
| Pressure range | 0 - 6 bar |
Explains the CLE chlorine sensor, its type, and applications.
Details correct usage and important safety precautions for the sensor.
Describes the physical components and structure of the CLE chlorine sensor.
Explains what the sensor measures (free chlorine, HOCl).
Details the amperometric operating principle and pH dependency.
Specifies storage temperature, humidity, and shelf life.
Lists items included in the standard delivery of the sensor kit.
Provides step-by-step instructions for filling the membrane cap with electrolyte.
Details how to assemble the electrode shaft with the filled membrane cap and insert into housing.
Outlines critical electrical connection requirements and power supply specifications.
Specifies the duration for initial sensor stabilization after commissioning or replacement.
Details the process for zero point and slope calibration of the sensor.
Lists the necessary conditions before performing calibration.
Addresses issues where the sensor cannot be calibrated due to display value discrepancies.
Covers problems like zero readings, unstable display, or incorrect values compared to DPD-1.
Troubleshoots inadequate water flow, air bubbles, and surfactant contamination.
Specifies how often the sensor requires servicing based on application.
Provides steps for cleaning the sensor membrane and replacing the membrane cap.
States that repairs must be performed at the factory.
Outlines the procedure for safely disconnecting and preparing the sensor for disposal.
Advises to observe applicable national regulations for disposal.
Lists standard delivery, complete kits, and spare parts with order numbers.
Lists relevant EU directives and international standards the product complies with.
Covers measured variable, application range, measurement range, and pH/temperature limits.
Details conductivity, resolution, pressure, flow, cross-sensitivity, and operating life.
Lists materials, supply voltage, output signal, and enclosure rating.
