ProNav Motion - Page 8

GPS Vector Lock: Locks current course over ground (COG). Motor
automatically adjusts heading to hold course against wind and waves,
or current. Boat will align with prevailing conditions, but desired course
will stay constant as long as thrust is set high enough to overcome the
elements.
How to Use
1. Press and release to lock current COG.
2. Adjust course by using PointDrive or manual left / right buttons.
3. Use the prop off button to disengage mode.
Notes
• Current COG can be viewed in the ProNav App “Map View” screen.
• Course can also be adjusted with the ProNav App or foot pedal.
• Foot pedal center thrust button can also be used to disengage mode.
Compass Heading Lock: Locks current compass heading. Motor will
automatically adjust to maintain the set compass heading.
How to Use
1. Press and release  to lock current compass heading.
2. Adjust heading using PointDrive or manual left / right buttons.
3. Use the prop on / off button to disengage mode.
Notes
• Current COG can be viewed in the ProNav App “Map View” screen.
• Course can also be adjusted with the ProNav App or foot pedal.
• Foot pedal center thrust button can also be used to disengage mode.
Feature Tip: Difference between GPS Vector andCompass
Heading Lock
GPS Vector lock keeps you on a constant course over ground. Your boat will align
with the wind or current while the bow maintains position along the GPS Vector
course. Compass Heading Lock will keep motor in a set compass direction but
will not keep you on a straight COG as a crosswind and waves may move boat off
intended course while maintaining the same compass heading.
For more info, watch this video:pronavmarine.com/heading-lock
FEATURES
GPS Heading
GPS Vector Lock
Compass Heading Lock
Drift
Compass
Heading
Course
Over
Ground
Course
Over
Ground
CRAB ANGLE
WIND/CURRENT/WAVES WIND/CURRENT/WAVES