Pronk Technologies Flow Trax FT-2 - Page 3

Pronk Technologies
2017 07-18
www.pronktech.com 800-541-9802
Page 3
©2015
This Operators Manual relates to FlowTrax software version 1.6. The user can verify the s/w version they have on
their FlowTrax by press and hold of the setup key. Version number is located in upper left hand corner.
This product is intended for testing purpose only and is not used in diagnostics, treatment or any other capacity
where they would come in contact with a patient.
The device shall only be used with the AC-DC adaptor provided or with AA Alkaline or Lithium batteries.
Operate this product using only accessories provided by Pronk Technologies.
If this equipment is used in a manner not specified by the Pronk Technologies, the protection provided by the
equipment may be impaired.
Service and calibration must be performed by Pronk Technologies or a designated service organization approved by
Pronk Technologies. Verify proper service and calibration by reviewing certification document returned with the
device.