Need help?Do you have a question about the PROPAIN YUMA and is the answer not in the manual?
General| Category | Mountainbike |
|---|---|
| Frame Material | Aluminum |
| Suspension Type | Full Suspension |
| Fork Travel | 150 mm |
| Wheel Size | 29" |
| Drivetrain | 1x12 |
| Brakes | SRAM |
This booklet extends the owner's manual, detailing Yuma model specifics and weight limits.
Symbol indicating imminent risk to life or health if instructions are not followed.
Symbol warning of actions that may cause damage to property or environment.
Symbol providing information or referring to important passages in operating instructions.
Specifies torque values for frame and suspension mounting bolts, recommending Loctite 243.
Details maximum front/rear travel and shock mount specifications for the Yuma frame.
Information on derailleur hanger/dropout tightening and rear axle specifications.
Details M8 bolt tightening for the shock and general M4-M8 screw torque recommendations.
Explains how to check if a new shock is compatible with the Yuma frame.
Covers cleaning, lubrication, servicing, and proper air pressure (SAG) setup for the shock.
Approved fork travel limits and fork length measurement for the Yuma.
Guidelines for cleaning and lubricating the fork to ensure performance.
Discusses dropout options for wheel size and the function of the drive-side dropout.
Information about the ISCG socket being welded directly onto the frame for chain guide mounting.
Instructions for removing protection material and checking components after unboxing.
Steps for mounting the front wheel, ensuring brake disc alignment and secure tightening.
Guidance on attaching the handlebar to the stem, including torque specs and cable routing.
Advice on horizontal saddle mounting and seat post positioning.
Emphasizes checking air pressure in tires, fork, and shock for safe riding.
Final step to mount pedals, noting they are not always included.
To Next Page
