Propur Scout II User Manual

Propur
®
Scout II
TM
Instructions
Clean your system:
Remove filter package before washing.
Wash your hands.
Use liquid dishwashing soap along with the
yellow side of the included scrubby sponge to
clean the (a)(b)(c)Scout II housing.
Scout II is also dishwasher safe.
*
1.
2.
To use your system:
Place (b)upper container onto (c)lower
container.
Fill the upper container with potable water.
Cover with (a)lid. Allow water to pass through
the filter.
We recommend you cycle water 2 times and
discard before using.
WARNING: KEEP AWAY FROM DIRECT SUNLIGHT
Use lid
upside down
as a stand
for the upper
container.
*
1.
2.
Installing the lter element:
Remove the filter and hardware from package.
Hold the filter by the plastic base. Run
the ceramic under cool running water.
Scrub the filter with the rough(green) side of
the enclosed scrubby sponge. Rinse well
Warning: Do not use any soap on the filter. Do
not allow water to go up the stem of the
filter.
Place the (d1)washer onto the stem of the
filter.
Place the (d)filter stem through the hole in
upper container.
Install (d2)wing nut on the underside of upper
container. DO NOT OVER TIGHTEN.
1.
2.
3.
4.
5.
6.
(a)
(b)
(c)
(d)
(d1)
(d2)
(c)
(b)
(a)
(d2)

Propur Scout II Specifications

General

Manufacturer	Propur
Product Category	Water Filtration Systems
Model	Scout II
Type	Gravity Water Filter
Diameter	6.5 inches
Flow Rate	0.5 gallons per hour
Capacity	2.25 liters
Dimensions	9.5 x 6.5 x 6.5 inches
Material	Stainless Steel
Height	9.5 inches (assembled)
Filter Type	ProOne G2.0
Filtration Technology	Gravity-fed ceramic and carbon block
Contaminant Reduction	Reduces bacteria, cysts, heavy metals, and chemicals

Summary

Clean Your Propur Scout II System

System Cleaning Procedure

Wash hands and clean the Scout II housing with dish soap and sponge. The system is also dishwasher safe.

Install the Propur Scout II Filter Element

Filter Preparation and Assembly

Rinse and scrub the ceramic filter. Attach washer and wing nut to the filter stem and upper container.

How to Use Your Propur Scout II System

System Operation and Priming

Assemble containers, fill with water, and let it filter. Cycle water twice before first use.

Propur Scout II Limited Warranty Information