DJ 2
Cut through audiences for a pronounced sound, With low and high end boosts and a slight mid cut.
Examples
• Pre-recorded music
• Mixed media events such as weddings or parties
When using the flying frame please consult a trained professional.
1. Insert the front pillar into the slots at the bottom
of the speaker. This allows you to connect the
speaker to the stand adapter. Please ensure that
both holes are aligned before doing so
2. Achieve the speaker angle you desire by aligning
the holes to your intended placement and then
inserting the safety pin. Please ensure this is fully
inserted before letting go.
3. To connect the front of the speakers, lift the
bottom to ensure that the bracket aligns with the
hole in the top speaker and fully insert the safety
pin. Then adjust the angle you desire.
4. When not in use secure the pins into the spare
holes.
SPEAKER SET UP
14
To Next Page
Loading...