Need help?Do you have a question about the Pros'Kit MT- 4615 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Model | MT-4615 |
| Brand | Pros'Kit |
| Type | Digital Multimeter |
| Display | LCD |
| Continuity | Yes |
| Diode Test | Yes |
| DC Voltage | 600V |
| AC Voltage | 600V |
| Current Range | 10A |
| DC Current | 10A |
| Resistance Range | 60MΩ |
| Resistance | 60MΩ |
| Capacitance Range | 100mF |
| Capacitance | 100mF |
| Frequency Range | 10MHz |
| Frequency | 10MHz |
| Temperature Range | -20°C to 1000°C |
| Safety Rating | CAT III 600V |
| Voltage Range | 600V |
Steps for checking the anemometer after receiving it and during storage or shipping.
Guidelines for operating the anemometer under specified conditions and handling potential failures.
Explanation of the CE mark indicating compliance with EMC requirements.
Procedures and precautions for repairing and maintaining the anemometer by trained personnel.
Overview of the anemometer's features, portability, display, and measurement functions.
Explains the function of each button on the anemometer, including power, backlight, and mode selection.
Instructions on how to turn the anemometer's power on and off using the power button.
How to lock the current reading and display the HOLD symbol, and how to unlock it.
Instructions for activating the backlight and notes on its usage and battery life impact.
How to perform wind speed measurements by placing the detector in the environment.
Steps for setting the area for air volume measurement, including adjusting value and units.
How to perform air volume measurements by placing the detector and setting the mode.
To Next Page