Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
The Cable Channel works with GABLE on the remote. If this feature is
set, pressing GABLE selects the channel to see cable channels on your TV.
The Cable Channel setting depends on which channel your cable box
must be on to see cable channels. The channels usually used are 02, 03,
04, 05 or 06. Consult your cable company for more information.
1. Select the Setup menu
13
Controls Alarm Ad
A. Press TV to set the remote to
control the TV.
B. Press MENU.PROG to select the
Setup menu. This menu is
white.
2. Highlight Cable Channel
;ontrols Alarm Ad
13
A. Press MOVE • (down) to move
down the menu until Cable
Channel is highlighted.
B. Press • to underline the
channel.
3. Enter channel number
13
A. Enter the number for your cable
box, either 02,03,04,05, or 06.
Press CHANNEL down until
"Disabled" is displayed to turn
this fi.'ature off.
13
To Next Page
Loading...