TO ASSEMBLE THE UMBRELLA
TO OPEN THE UMBRELLA
Before opening your umbrella, first attach the finial to the top
of the umbrella. Then insert the bottom pole into the upper pole
housing and lock into place. You must have your umbrella
securely fastened into an umbrella base.(sold separately)
( Fig. 2)
( Fig. 1)
Before opening your umbrella, gently pull apart and separate the
ribs into their natural open position. Pull down the rope until you
see the lower hole or upper hole on the upper pole, then insert the
pin into the hole. At that time, the umbrella is fully open and ready
to use.
( Fig. 3)
( Fig. 4)
Care Instruction:
Wash umbrella canopy with a mild solution of soap and
water. Rinse thoroughly and drip-dry in an open position.
Do not use bleach or solvents on aluminum frame.
Keep closed when not in use. Not recommended for use
in patio tables. If used in a patio table, always use
with an umbrella base and lower in windy conditions.
Buttons to align
Pin
Rope
2 3
To Next Page
Loading...
