Proshade 2327658 - User Manual

R
Umbrella Base with Wheels
ITM. / ART. 2327658
ASSEMBLY INSTRUCTIONS
READ CAREFULLY
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
For assistance with assembly, parts, or problem resolution please contact customer
For easier assembly we recommend using
a power screwdriver to install the screws.
(Do not use an impact driver)
service in US and Canada at 1-877-730-1583, 9:00AM - 5:00PM EST, Monday - Friday,
English, French, and Spanish spoken or visit proshade.com.
THIS ITEM IS INTENDED FOR OUTDOOR DOMESTIC USE ONLY,
NOT FOR COMMERCIAL USE
1
CARE INSTRUCTION:
Clean gently with environmentally - friendly soap solution and water
using a sponge. Do not use abrasive materials, wire brushes,
chemicals, cleansers or bleach. Do not use a pressure washer.
Rinse well. Allow to air dry.
SAFETY INSTRUCTIONS:
1. Do not use the umbrella base with wheels before filling it with weight.
2. The heavier the umbrella base, the more stable it will be.
3. Do not use in windy conditions. Never tilt your umbrella in windy
conditions. Always close and remove the umbrella from the base in
windy conditions.
4. Use the umbrella base with wheels on flat surfaces only. The locking
wheels are meant to keep the umbrella base with wheels locked in place
on flat surfaces. The locking wheels are not meant for locking the
umbrella base with wheels in place on sloped surfaces.
5. Keep the wheels locked except when moving your umbrella base with wheels.
The locking wheels may wear down over time making the brake
mechanism less effective. Check for wear and replace the locking
wheels when necessary.
6. Do not move, lock, or unlock the umbrella base with wheels with bare feet.
7. The umbrella base with wheels is not designed to roll in sand or grass ground.
Submerging the wheels in sand or grass will clog the ball bearings.
8. Do not allow children to play with or operate the umbrella base with wheels.
CAUTION:
Before assembling the umbrella base, read this manual and follow
the safety instructions.

Summary

Caution and Care Instructions

General Safety Precautions

Follow all safety guidelines for proper and safe use of the umbrella base with wheels.

Assembly Instructions

Parts List

Lists all components included in the package with their respective quantities for assembly.

Step 1 - Fasten Wheels to Base Substructure

Attach the locking and non-locking wheels to the correct slots on the base substructure.

Step 2 - Fill the Base with Bricks and Sand

Add weight to the base using bricks and sand for stability, following recommended procedures.

Step 3 - Install the Base Cover

Attach the base cover to the assembled substructure.

Step 4 - Install the Stem

Insert and secure the umbrella stem into the base cover.

Step 5 - Stem Height Option

Adjust the stem height for compatibility with patio tables by removing the middle section.

Step 6 - Select Reducer

Choose and insert the appropriate reducer for the umbrella pole size and secure it.

Locking Wheels Instructions

To lock wheels

Engage the locking mechanism by pressing the pedal on the wheels.

To unlock wheels

Disengage the locking mechanism by lifting the pedal on the wheels.

Moving Precautions

Important considerations before moving the base with an umbrella, including weight and umbrella state.

Letter of Warranty

Frame Warranty

Covers defects in frame materials and workmanship for two years, excluding assembly or environmental damage.

Finish Warranty

Covers peeling, cracking, or blistering of the finish for two years, excluding scratches or abrasion.

Warranty Exclusions

Details items not covered by the warranty, including abusive use, neglect, and acts of nature.

Proshade 2327658 Specifications

General

Brand	Proshade
Model	2327658
Category	Patio Furniture
Language	English