Do you have a question about the ProSound L58AW and is the answer not in the manual?
frequency | 174.5MHz |
---|---|
frequency stabilization | <+/-30ppm |
dynamic range | >90dB |
harmonic distortion | <0.5% |
---|---|
frequency response | 40Hz~15KHz +/-3dB |
transmitter power | 8.5mV |
battery type | 9V PP3 |
---|---|
continuous usage | 6 hours |
s/n ratio | >90dB |
frequency | 173.8 - 175.0MHz |
---|---|
frequency stabilization | <+/-30ppm |
dynamic range | >90dB |
harmonic distortion | <0.5% |
---|---|
frequency response | 40Hz~15KHz +/-3dB |
transmitter power | 8.5mV |
battery type | 9V PP3 |
---|---|
continuous usage | 6 hours |
s/n ratio | >90dB |
frequency | 174.1MHz |
---|---|
frequency stabilization | <+/-30ppm |
dynamic range | >90dB |
harmonic distortion | <0.5% |
---|---|
frequency response | 40Hz~15KHz +/-3dB |
transmitter power | 8.5mV |
battery type | 9V PP3 |
---|---|
continuous usage | 6 hours |
s/n ratio | >90dB |
Details the front panel controls (POWER SWITCH, STATUS LED, RF SIGNAL LED, VOLUME) and back panel connections (POWER INLET, AUDIO OUT, ANTENNA) for L58AW/L60AW.
Describes the L59AW front panel controls (POWER SWITCH, STATUS LED, RF SIGNAL LEDs, MIC VOLUME) and back panel connections (POWER INLET, AUDIO OUT, ANTENNA).
Guide on connecting the L58AW/L60AW receiver's audio output to a mixer/amplifier and plugging in the AC adapter.
Instructions for connecting the L59AW receiver's outputs (channels A/B) to a mixer/amplifier and connecting the AC adapter.
Details on the transmitter's ON/OFF/STANDBY switch, POWER ON/LOW BATTERY LEDs, MUTE switch, and battery compartment.
Step-by-step guide for powering the transmitter on, checking the receiver signal, and using standby/off modes.
Information on transmitter battery insertion, Lo Bat indicator, input connection, and adjusting input gain for different sources.
Lists key specifications for L58AW/L60AW, including frequency, range, distortion, power, receiver requirements, and battery life.
Details specifications for the L59AW model, covering frequency, response, range, distortion, power, receiver, and battery life.