EasyManua.ls Logo

Prospera PL028 - Page 9

Prospera PL028
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Heating
Automatic water temperature balancing system:
The default maximum water heating temperature is
95once the power is turned on.
If the just-filled-in water temperature is lower than 95, the
Heating function will be turned on automatically and
stopped when its water temperature reaches 95. When its
water temperature cools down below 95, the Heating
function will be turned on automatically again, and so on.
When the water temperature reaches its default maximum
temperature (95), the Keep Warm function takes effect.
Note: the Heating function will not be on if your fill-in water
temperature is already higher than its default maximum 95.
Changing the Default Water Heating Temperature:
If you prefer to change its default maximum water
temperature to be higher than 95, you can press the TEMP +
/ TEMP - to reset the maximum water heating temperature.
The highest heating temperature you can set is 118.
The lowest heating temperature you can set is 95.
6
Temp+/-
When to use Temp+/- :
The Temp+/- button can be used to change maximum water
heating temperature under any massage modes.
Press TEMP + to increase water heating temperature you
want (such as 115). After 3 seconds, your just-set
temperature will disappear from LED screen, and its LED
display will switch back to show its current water
temperature.
Press TEMP - to decrease water heating temperature (such
as 100). After 3 seconds, your just-set temperature will
disappear from LED screen, and its LED display will switch
back to show its current water temperature.
To protect the heating spa, it is recommended NOT to set
temperature to the maximum level (118).
Minimum and Maximum Water Temperature:
The highest heating temperature you can set is 118.
The lowest heating temperature you can set is 95.
If you do not press the Temp+/- button to adjust the default
heating temperature, the water temperature will stay at 95
(default setting).
The Automatic Water Temperature Balancing System will be
initiated to turn on/off the Heating function automatically to
keep water temperature at 95.