I
I
S
S
S
S
U
U
E
E
S
S
ISSUE DATE DETAILS OF CHANGE
CHANGED
BY
1 16/02/00 ORIGINAL ISSUE -
2 16/01/01 TABLES 2 & 3 UPDATED, ADDED TABLE 4 PWD
3 12/09/01 ADDITIONAL INFORMATION PWD
4 29/11/02 TABLES 2, 3 & 4 UPDATED & PIDs ADDED PWD
4 Rev 1 16/08/05 Updated 6400 Specification PWD
4 Rev 2 05/04/06 Added 4000 & 5000 Device Information PWD
4 Rev 3 26/02/07
Amended section 3.1 - cable type & earthing
Split table 2 into tables 2a and 2b
Added 6000/CPRO to table 2b
Added 6000/DIU to table 3
Amended section 7.5 – Fault Output
Amended 6400 Specification – Aux Fault Output
Amended Appendix A – Total loss of PSU
PWD
4 Rev 4 14/05/10
Updated Appendix A
Added info on 6000Plus devices in table 2
Removed PIDs for loop devices
PWD
4 Rev 5 04/08/11
Added CE marking information in Appendix E
Added note on 4400 devices in Appendix C
Amended section 7.4 – Fire Station Output
RML
4 Rev 6 08/02/12 Amended section 2.2.1 – ‘6000 Series’ Double Addressing PWD
Notes
1) This manual covers 4400, 5400 and 6400 fire alarm systems. The differences are described in the
appropriate sections.
2) This manual also covers General Alarm and Cell Call systems.
To Next Page
