RG-27
Engine spare parts
REF DESCRIPTION
M1080.021 ONE WAY BEARING
M1081.003 CONE COLLET
M1081.005 SG CRANK FOR PULL START
M1082.006
PROTECH BLACK CRANCKCASE
W/ BEARINGS .21
M1081.008 CON ROD
M1081.013 SCREW FOR HEAD (4 PCS)
M1080.018
PULL START ASSEMBLY
W/O ONE-WAY BEARING
M1081.020 SLIDE CARBURETOR ASSEMBLY (PLASTIC)
M1081.022 CRANKCASE BEARING FRONT & REAR SET
M1081.023 STARTER SHAFT
M1081.024 SCREW FOR PULL START (4 PCS)
M1081.026 GASKET SET
M1081.030 WRIST PIN CLIP (8 PCS)
M1081.033
CARBURETOR MAIN BODY FOR PLASTIC
CARBURETOR
M1081.040 EXHAUST SEAL (2 PCS)
M1081.041 HIGH SPEED NEEDLE ASSY
M1081.042 CABRETOR RETAINER SET
M1081.043 FUEL INLET NIPPLE
M1081.044
IDLE ADJUSTMENT SCREW FOR PLASTIC
CARBURETOR ASSEMBLY
M1081.045
LOW SPEED NEEDLE ASSY FOR PLASTIC
CARBURETOR ASSEMBLY
M1081.046 SLIDE ROTOR FOR PLASTIC CARBURETOR
M1081.047 ROBBER BOOT
M1081.048 PILLOW BALL MOUNT W/ HS SCREW
M1081.049 GUIDE SCREW FOR PLASTIC CARBURETOR
M1081.050 BACK PLATE FOR PULL START
M1081.051 SCREW FOR BACK PLATE (4 PCS)
M1082.009 WRIST PIN .21
M1082.010 PISTON & SLEEVE SET (CHROME PLATIN) .21
M1082.011
DIE-CASTING HEAD .21
M1082.012 HEAT SHIM (1PC) .21
M1082
M1081.013
M1082.011
M1082.012
M1082.010
M1081.008
M1081.022
M1081.003
M1082.006 M1080.021
M1080.018
M1081.040
M1081.024
M1081.051
M1081.050
M1081.026
M1081.023
M1081.005
M1081.030
M1082.009
M1081.020
M1081.041
M1081.043
M1081.044
M1081.033
M1081.049
M1081.046
M1081.045
M1081.047
M1081.048
M1081.042
To Next Page
Loading...
