To Next PageTo Next Page
Need help?Do you have a question about the protech ProMAX and is the answer not in the manual?
General| Brand | protech |
|---|---|
| Model | ProMAX |
| Category | Motorized Toy Car |
| Language | English |
Front shocks are shorter than rear shocks.
Rear shocks are longer than front shocks.
Instructions for attaching front shock absorbers.
Rear shock absorbers assembly is similar to front.
Detailed steps for installing steering and throttle servos.
Instructions for placing receiver battery and receiver.
Steps for mounting the switch and antenna.
Procedure for installing the fuel tank.
Steps for mounting front and rear brake levers.
Connecting throttle and brake to the servo.
Further steps for throttle and brake linkage assembly.
Instructions for assembling the tuned pipe system.
Gluing tires to rims and securing wheels.
Cutting the car body with special scissors.
Painting the car body and wing from the inside.
Instructions for assembling differential components.
Mounting the main spur gear.
Mounting the brake joint cup components.
Assembling the central differential and brake components.
Mounting the front gearbox and shock stay.
Assembling the front steering knuckles.
Detailed steps for assembling front suspension arms.
Using pliers to insert steering ball into suspension arms.
More steps for assembling front suspension components.
Instructions for mounting the front stabilizer.
Mounting the front shock absorbers.
Mounting the rear gearbox and stabilizer.
Assembling the rear wheel suspension upright.
Instructions for assembling rear suspension arms.
Correct positioning of the triangle part for suspension.
Attaching rear suspension arms and drive shafts.
Remember to insert the spacer during assembly.
Mounting the rear shock absorbers.
Instructions for assembling the servo saver.
Assembling the steering tie rod components.
Connecting the servo to the steering linkage.
Further steps for assembling the servo saver.
Attaching the servo saver and center diff to the chassis.
Ensure servo saver is perpendicular to servo arm.
Installing the front suspension components.
Installing the rear suspension components.
Instructions for assembling the clutch components.
Steps for assembling the air filter.
Detailed instructions for installing the engine.
Connecting throttle and brake linkage to the servo.
Mounting the radio plate and related components.
Installing radio plate and throttle linkage.
Mounting the plastic side guards for protection.
Mounting the front chassis stiffener plate.
Assembling the front steering rod linkage.
Aligning the servo saver correctly.
Adjusting throttle and brake servo alignment.
Installing body posts for mounting the car body.
Attaching the car's wing.
Detailed guide for the ProTECH SX-21 engine.
Instructions for installing the optional 2-speed gearbox.
Adjusting the shift point for optimal performance.
