FUNCTIONS
NCV Detection Move the rotary switch to NCV. When voltage
is detected, the alarm will sound and the LED
indicator will ash.
Hold Button Press the button to lock readings as displayed on
screen. Press again to unlock.
LED Indicator Flashes when voltage is detected.
LCD Display Readings and measurements taken by the
multimeter appear in this area.
Backlight Button Press to turn the backlight on. Light will remain
on for approximately 10 seconds.
Auto Backlight In low light conditions, the LCD Display backlight
will automatically turn on.
Low Battery The battery icon will appear on screen when
battery power is low and the battery needs
replacing.
Rotary Switch Select a measurement range by turning the
switch to the preferred option.
Input Jacks • V/ΩmA
• COM
• 10A: Input terminal for 10A current.
6
To Next Page
Loading...
