5
Hz/% Button • Press the button to measure frequency or duty cycle
while measuring voltage.
• Press the button again to return to measuring
voltage.
°C/°F Room Use this button to switch between Celsius and
Fahrenheit room temperature measurements.
Non-Contact
Voltage
Detection
• Face the top of the multimeter to the ACV source
you wish to test.
• If source voltage is 50-1000V, the LED indicating
light will turn on.
NOTE: Static electricity or other sources of energy can
randomly trip the sensor.
Input Jacks • VHz%: Positive input terminal
• COM: Negative input terminal
• µA mA: Positive input terminal
• 10A: Positive input terminal for 10A currents
Auto Power
Off
The auto power off feature will turn the meter off
after 30 minutes of inactivity.
Low Battery
Indication
will appear on screen when the battery voltage
drops below the operating level.
To Next Page
Loading...
