2
The Protect 1206i is a new class of counter surveillance device. Unlike all typical
searching devices it can detect modern 'hidden' bugs which use such protocols as
Bluetooth and Wi-Fi at a long distance. Such bugs, especially Bluetooth types, are
practically undetectable by common RF detectors due to their very low transmitted
power and special type of modulation. The Protect 1206i uses a separate channel
with a high, (2.4/5 GНz) frequency pre-selector to detect and locate Bluetooth and
Wi-Fi with a much higher sensitivity. The unit also then processes the demodulated
signal in order to identify which protocol has been detected. In addition the unit
can detect all 'classical' bugs and inspect them for the presence of correlation by
sending sound impulses as well as other digital transmissions at a standard distance
(GSM, 3G, DECT, etc.)
The unit which you have selected is not a slightly improved version of the old device,
but a completely new, revolutionarily changed sweeping tool.
New wide-band antenna (for ANT1 socket)
Wider coverage, particularly at lower frequencies, has made it possible to increase
the detection distance of a conventional VHF/UHF bug by 2-3 times, while saving
perfect sensitivity at the higher bands (GSM, Wi-Fi, Bluetooth, etc.)
New Micro-Pointer microwave antenna (for ANT1/ANT2 socket)
This is the first time when an affordable RF detector gets the microwave log-
periodic directed antenna supplied in the standard set. 2-4 times longer distance
to all sources above 2GHz (Wi-Fi 2.4GHz, Wi-Fi 5GHz, Bluetooth, Wi-Max, LTE
High, etc.). The directionality provides easy pinpointing of a wireless source. Now
you not only know that there is a Wi-Fi source, but can quickly pinpoint it.
Increased dynamic range
The bargraph now rises quickly to weak signals and increases slowly to strong
signals, thus giving the opportunity to locate the source
New Attenuator
The new algorithm widens the dynamic range even more, making the location
procedure easier. Turn on the attenuator near a strong source, the bargraph which
lights fully will drop and then increase further, therefore making it possible to
locate more precisely.
Extra high sensitivity to Bluetooth, Wi-Fi 2.4 GHz, Wi-Fi 5GHz and wireless video
cameras
Frequency range:
Main antenna ANT1: 50-12000 MНz
Auxiliary antenna ANT2: 2.4 - 2.48 GНz, 4.9 - 5.875 GНz
The perfect tool for searching for digital and analogue transmitters of all types
16-segment bargraph indicator
3 modes: sound, vibration and mixed
Correlation function discovers FM-transmitters by the presence of correlation
(probing sound is used)
2 levels of sensitivity (attenuator)
Other features:
New features:
To Next Page
Loading...