Need help?Do you have a question about the ProTek R/C Prodigy 610 and is the answer not in the manual?
General| Brand | ProTek R/C |
|---|---|
| Model | Prodigy 610 |
| Category | Battery Charger |
| Language | English |
Visual representation of charger connections and ports.
Features an AUTO function for feed current and two-way linkage for safety.
Built-in individual-cell voltage balancer, no external balancer needed.
Monitors and balances cells during discharge, stops on abnormality.
Limits charging capacity, processing time, and uses temperature probe for cutoff.
Stores up to 10 battery data sets and supports cyclic charge/discharge.
Connects to PC via USB for charge/discharge curve analysis.
Provides 5V, 1A continuous current for mobile devices.
Never leave unattended, keep away from elements, use heat-resistant surfaces.
Incorrect voltage settings can cause fire or explosion.
Lists battery types that should not be charged or discharged.
Verify battery type, current, voltage, and connections.
Charge quantity calculation, use of fast charge only for suitable batteries.
Connect red to positive, black to negative; ensure quality connectors.
Strictly follow battery manufacturer's charging methods and current.
Caution regarding parallel/series connections and voltage imbalance.
Purpose of discharging, setting correct voltage, avoiding deep discharge.
Explains memory effect in NiCd/NiMH batteries and its impact.
Recommends partial discharge and cyclic use for optimizing capacity.
Details power source requirements (AC-DC supply, car battery).
Emphasizes correct parameter setting and connection sequence to avoid shorts.
Explains connecting the balance wire to the charger with correct polarity.
Incorrect connections will damage the charger.
Select LiFe, LiIo, or LiPo voltage correctly to avoid explosion.
Charger detects Li-ion cells automatically; CHK Time adjusts detection.
Delta peak sensitivity for NiMH/NiCd termination, ranges and risks.
Enables temperature probe for automatic charge termination.
Sets delay between charge/discharge cycles for battery cooling.
Enables trickle charge to maintain full charge after fast charge.
Automatic timer to prevent overcharge in case of fault.
Sets maximum charge capacity to automatically stop the process.
Configures button press beeps and operational alert sounds.
Monitors input voltage and terminates operation if it drops too low.
Adjusts the brightness of the charger's LCD screen.
Programs for charging/discharging Li-ion, LiPo, LiFe batteries (3.3-3.7V/cell).
Explains CC/CV charging method and charge voltage curves.
Correct final voltage (4.2V LiPo, 4.1V Lilo, 3.6V LiFe) is crucial.
For charging LiPo/LiIon/LiFe without a balance lead.
Compares user-set cell count ("S") with detected ("R") for safety.
Balances individual Li-Po cells during charging via balance lead.
Verifies detected vs. set cell count for safe balance charging.
Reduces CV process time by altering current reduction curve.
Checks detected vs. set cell count for safe fast charging.
Charges/discharges battery to a specific voltage for long-term storage.
Sets discharge current (max 1C) and final voltage to avoid deep discharge.
Monitors cell voltage during discharge, shows errors for abnormalities.
Manual or Auto charging for NiCd/NiMH, setting current limits.
Sets discharge current (0.1-5.0A) and final voltage (0.1-25.0V).
Configures charge/discharge sequences and cycle numbers (1-5).
For charging Pb batteries (2-24V), recommends 1/10 capacity for current.
Sets discharge current (0.1-5.0A) and nominal voltage for Pb batteries.
Stores and recalls up to ten battery data sets for quick setup.
Selects stored data number to recall battery specifications.
Displays user settings, cell voltage, input voltage, etc., during operation.
Lists and explains various warning and error messages displayed by the charger.
Disclaimer regarding improper use and product liability.
Defines key terms like final voltage, current (A/mA), and 'C'-rating.
Explains how to determine nominal voltage for different battery types.
Outlines the one-year warranty, exclusions, and service terms.
To Next Page