5、Function & Effect Description
(1) RCC, with automatic RCC receiving function (Only for RCC version).
Receiving conditions for entering RCC:
a) After power on or reset, it automatically enters RCC reception;
b) Long press the "SNOOZE/LIGHT" button to forcibly enter RCC reception;
c) During the receiving process, long press the "SNOOZE/LIGHT" button to stop
RCC receiving;
d) Daily RCC timing automatic receiving time: automatic mandatory reception at
1:03, 2:03, 3:03 every morning, and selection at 4:03, 5:03;
RCC receiving time lasts about 3~8 minutes
RCC receiving graphics:
a) The symbol flashes when entering reception;
b) The reception is successful, and the entire RCC reception symbol is
continuously displayed;
c) When the signal reception is unsuccessful, the symbol will disappear and RCC
will exit.
(2) RF function:
After installing the battery it detect the temperature and humidity. it will
automatically enter the RF reception for 3 minutes, and then enter the RCC
reception after 3 minutes;
In the standard mode, long press the "▲/RF" key to forcefully clear all outdoor
channel data and re-receive; the connected CH temperature does not receive
To Next Page
Loading...