Proton X70 2022 - 0° Camera

51
15. 360° Camera
Click the [360 Camera] application icon or engage into R gear to start the 360 Camera.
Engage into R gear to display the rear-view screen.
1
Press the light blue 3 to zoom in the image of the right single-channel camera.
2
Press the icon to enable free adjustment of 3D angle of view by hand
gestures.
• With deactivated, the images of the inside cameras are shown by
default, and you can select the image of the desired camera by clicking the
corresponding area at the outside of the vehicle.
• With activated, the images of outside cameras are shown, and you
can rotate to view the surrounding around the vehicle.
3
Press the icon to set the following functions:
• Dynamic trajectories
• Rear gear exit delay
• Blind view shadow
• Brightness
• Car Opacity
• Turn Light Trigger AVM view
• Reset To Factory Calibration
• Software Version